The Lennor factory floor — orderly rows of stacked veneer and finished boards receding into warm light

We make the boardyour work stands on.

Lennor Ply is a plywood manufacturer based in Karnataka. Everything we sell, we make — on our own sixteen-station line, under our own mark.

01Why Lennor exists
The invisible promise

Trust can’t beoutsourced.

When a carpenter screws a hinge into a board, or a family loads a wardrobe shelf for the next twenty years, they are trusting something they will never see — the core. Whether the veneers inside are gap-free, whether the glue line is honest, whether the board was really treated against borers. Lennor Ply was built around that invisible promise. We compose every core ourselves, mix our own resin, calibrate every board and test every batch in our own laboratory against IS:303 and IS:710. Nothing is outsourced, because trust can’t be.

Professional wood inspector examining high-grade teak veneer panel in clean modern factory workshop
Facing — grain-matched by handPlate 01
02The mark
Earned, not printed

A log, resolvedinto layers.

Our mark is a log’s cross-section, split into the layers it becomes. It goes on every board that survives all sixteen stations — and on nothing else. If it didn’t survive them, it isn’t a Lennor.

03What we stand on
Three commitments

Three things wewill not trade.

These are the decisions that cost us money and win us specifiers. We have never found a good reason to reverse any of them.

01

Honest construction

Full-size, gap-free composed cores in every board. No fillers, no voids, no surprises when the saw goes through.

02

Certified, then tested again

IS:303 and IS:710 certification is the floor, not the ceiling. Our in-house lab re-tests every batch before it ships.

03

Built for decades

ACC treatment, calibrated faces and grade-matched resin — decisions made for the board’s twentieth year, not its first.

04The facility
12.97°N 76.10°E

Made in Karnataka.Shipped anywhere.

Our plant sits inside Karnataka — the full production line, ACC treatment plant and testing laboratory under one roof.

Inside the Lennor plant — the hot press at work under bright factory lighting
The line, mid-cycleKarnataka

One roof, one line

Peeling to packing happens in a single continuous flow — no transport damage between processes, no mixed-source cores.

Dealer & project supply

We supply dealers, contractors and institutional projects directly from the factory gate, with pre-cut sizing for bulk orders.

Visits welcome

Architects and bulk buyers are welcome to inspect the line and the lab before they order. Seeing is believing — call ahead and come through.

Walk the production line

Put the Lennor mark
on your next project.

Talk to us about grades, dealer pricing, institutional supply or a walk through the factory floor.

Contact us +91 77607 78886